Vägledande monteringstid: 10-12Tim
Teknisk specifikation från tillverkaren:
Laddtryck: 8 PSI
Effekt i HK: 260 DIN (Stock 170)
Vridmoment: 315 NM (Stock 210)
0 - 100: Man : 6,8 sek, Aut : 7,4 sek
Installations tid : 8-10 timmar
Några av marknadens bästa och mest effektiva kompressor system till BMW tillverkas av det norska företaget ESS (European Supercharger Systems).
ESS mål med kitten:
-Hållbarhet (Det är därför ESS även lämnar 2 års garanti på sina kitt!)
-Ska kunna användas dagligen!
-Lätt och relativt snabb installation!
-Rimliga priser!
-Att leverera 100% kompletta och testade system!
-Att systemen ska kunna installeras på orörda original motorer (tack vare lågt laddtryck)!
Notera:
-Även om bilen med kittet installerat inte överskrider kraven på avgasutsläpp så går det inte att besiktiga bilen med kittet på då det inte är TÜV-godkänt. (Det går givetvis att montera av kittet vid besiktningen och sedan montera dit det igen)
-Motorstyrenheten måste skickas till Norge för programmering av ny mjukvara som är anpassad för modifieringarna på motorn. Fraktkostnad är med räknad i det totala priset.
-Det är 2 års garanti på kittet. Dock så kan vi inte lämna någon garanti på motorn då vi inte vet hur skicket är på den.
Du kan läsa mer om systemen här: www.esstuning.com
ESS´s egen beskrivning av kittet: (Notera att installations tiden är beräknad på den tid det tar för ESS att installera det, så det tar förmodligen längre tid om någon annan gör det!)
E60 520 2.2 TS2 8PSI Supercharger System (115-34)
The ESS 520 2.2 M54 TS2 series system is equipped with a Lysholm Twin Screw supecharger which has several advantages over the centrifugal compressors used in earlier ESS M52TU/M54 systems. It creates a higher boost-pressure at lower engine rpm, thus significantly increasing bottom and mid range torque. Lag time during shifts and on-off throttling are reduced to a minimum and the throttle response is incredible. The twin screw principle is also highly energy efficient, which contributes to the extreme power and torque output of the ESS TS Series systems. The patented liquid intercooling system consists of 3X500mm Laminova cores integrated into a high strength cast aluminium ESS intake manifold system covering all 6 cylinders resulting in flow-matched air distribution and optimal cylinder balance along with ultra-efficient cooling capacity for up to 550HP. The liquid intercooler coolant is pumped via a high capacity marine-grade circulation pump through a high capacity front mount heat exchanger. The system also utilizes a throttle body type butterfly air bypass valve to reduce SC parasitic drag and increase fuel economy during cruising conditions. The entire ESS TS system consumes less than 2hp during cruising and it is very energy efficient.
The overall system efficiency, torque delivery, power production, cooling capacity, and room for higher power stages is considerably higher than that of any competitor. The Twin Screw supercharger is the only product on the market today to combine both a positive displacement design for maximum low-end torque and highly efficient top-end horsepower output. Also emission levels at high speed and boost are lower than with other turbo and supercharging systems.
The redesigned ESS MS45 engine control software is perfectly calibrated for the TS supercharged engine providing optimum ignition timing under all conditions, recalibrated EGas for quicker throttle response, recalibrated VANOS control and perfectly optimized fuel delivery supplied by 6 larger Bosch fuel injectors also included with the kit. The software also features a 6800RPM rev limit and removed top speed governor.
Power development is 100% smooth and the car behaves just like stock until you demand raw power. Then, the car completely transforms, providing brutal acceleration normally reserved for big displacement performance cars.
The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system installs in 8-10 hours using normal hand tools and no irreversible modifications to the car is required.
System components:
-Custom ESS Spec Lysholm 1.6L Twin Screw supercharger unit.
-High strength, dual-layer cast aluminum alloy ESS intake manifold with integrated high capacity Laminova based liquid intercooling system.
-Uni-belt SC drive system with additional OEM quality idler pulleys.
-6 larger Bosch fuel injectors.
-Throttle body style butterfly bypass system for superior fuel economy during cruising and optimal throttle response under all conditions.
-Perfectly optimized, dyno tweaked MS45 ECU software.
-CNC hard anodized brackets and hardware.
-Cast aluminium SC intake system with crankcase fume reduction system designed for boost.
-High temperature, custom made silicone hoses with clamps
-Detailed, step-by-step installation manual
-Heavy-Duty drive belt.
-All required installation hardware included
-2yr./unlimited mileage warranty.
ESS TS Series superchargers gives you the best of both worlds with instant boost, true industry-leading torque AND throttle response, while the ultra high efficiency of the twin-screw gives you maximum top end power. The TS2 is fully upgradeable to TS3.
ESS TS Series superchargers with it's Lysholm supercharger technology and CAD designed intake runners creates boost the instant the throttle is touched usually reaching full boost by ~2200 rpm - long before a centrifugal supercharger commonly even creates 1psi of boost, resulting in breathtaking low-mid range acceleration and it also removes the need to rev the engine high to get good acceleration.
Read more at www.esstuning.com
Låt vår BMW-specialiserade verkstad göra jobbet! Vi har kunskapen och de låga priserna!
Please note that the installation time is when ESS is installing the kit, that means that the installation probaly will take som more time when others are installing it!
Let one of our BMW specialized workshops do the mounting, we got the know how and low prices!